Haulotte upper control box decal part number 307P204060 serves as more than a cosmetic label on aerial work platforms. The decal provides the visual instructions operators rely on to execute commands accurately, and wear, fading or peeling can compromise both appearance and safe operation. The OEM component is designed for a range of Haulotte articulating and telescopic boom lifts, with material and adhesive properties intended to match original equipment standards.

Safety and the role of the upper control box decal

On aerial work platforms, control panel markings are part of the operator interface. A worn or missing upper control box decal can obscure function labels and increase the risk of incorrect input.

Because the decal is exposed to outdoor conditions, long-term sun, rain, dust and mechanical contact can cause fading, edge lifting or partial detachment. Replacing deteriorated markings helps preserve clear identification of controls and supports routine safety procedures.

OEM part 307P204060 and material standards

Part 307P204060 is an original Haulotte decal intended for the upper control box on multiple boom lift models. OEM construction is specified to maintain weather resistance, adhesive performance and legibility consistent with the equipment's original configuration.

Matching the original part also helps ensure that symbols, layout and function labels align with the control panel as built.

Compatible Haulotte boom lift models

The decal is listed for use across several Haulotte model families. The table below summarizes the models identified in the compatibility information.

How to confirm compatibility

Part number verification is the most direct method. If the existing decal carries 307P204060 , the replacement is a direct match. Model plate information should also be checked because control panel layouts can vary between production batches.

Before installation, confirming the machine serial number and part number against the specific equipment configuration helps prevent a mismatch between decal functions and control keys. A mismatch can leave labels unable to correspond to the adjacent controls.

Replacement and installation considerations

Decal replacement requires a clean surface. Oil, dust and old adhesive residue should be removed before application, and installation is best performed in dry, wind-free conditions to support adhesion and service life.

A decal should be replaced when text becomes difficult to read, symbols lose contrast, edges lift or sections detach. Illegible markings can lead to operator error and affect jobsite safety.